How Much Does a Porch Enclosure Cost in Charlotte?
Most porch enclosures we build in the Charlotte area cost $3,600 to $25,800. A screened porch typically runs $3,600 to $6,300, a Sunleaf℠ vinyl-film enclosure $10,100 to $16,600, and a Seravue℠ three-season glass enclosure $13,400 to $25,800. A Seravue℠ All-Season room on an existing porch is typically $19,700 to $36,800.
These aren't estimates from a pricing sheet: they're the middle half of real Valverax projects completed November 2024 – November 2026, out of 509 porch enclosures we've built since 2019.
Porch enclosure prices by type
Typical range is what the middle half of projects cost (25th to 75th percentile), so about a quarter cost less and a quarter more. Time is the median from signed agreement to the finished room.
| Enclosure type | Typical range | Median | Projects | Typical time |
|---|---|---|---|---|
| Screened porchScreen walls and a screen door on an existing covered porch. Keeps bugs out, not weather or pollen. | $3,600 – $6,300 | $5,000 | 14 | about 7 weeks |
| Sunleaf℠ vinyl-film enclosureClear vinyl-film stacking windows that open for fresh air and close against pollen, wind and rain. | $10,100 – $16,600 | $12,400 | 62 | about 3 months |
| Seravue℠ Three-Season glass enclosureAluminum frames with single-pane tempered glass sliders for clear views; used seasonally. | $13,400 – $25,800 | $16,600 | 22 | about 4 months |
| Seravue℠ All-Season roomInsulated glass and a conditioned room envelope (roof, floor, walls, HVAC) for year-round use. | $19,700 – $36,800 | $36,100 | 5 | about 5–6 months |
Valverax projects completed November 2024 – November 2026; insurance and commercial jobs excluded. Prices are the full contract price for the enclosure; flooring, ceilings, electrical and steps add to it when a project includes them.
Prices change. Pricing is subject to change due to supplier pricing, material costs, inflation and other factors. These ranges are for planning only and are not a quote; your written proposal sets your price.
What changes the price
- Size and number of openings. More wall sections means more windows and framing. A small back porch with three openings costs far less than a wraparound.
- The system. Screens cost least. Vinyl-film stacking windows cost more and add weather and pollen protection. Tempered glass costs more again, and insulated glass with a conditioned room costs the most.
- Doors, transoms and gables. Each door, transom above the windows, or fixed trapezoid panel at a gable adds to the price.
- Reusing the existing frame. Fitting windows into an existing screen frame is the least expensive route. New aluminum wall framing, knee walls or glass panels under the windows cost more.
- The rest of the room. LVP or composite flooring, a vinyl or tongue-and-groove ceiling, outlets and lights, a pet door, steps or landings are all priced on top.
- HOA and permits. We prepare the HOA paperwork and handle building permits where they are required.
For a number for your own porch, the porch enclosure calculator gives an estimated range and monthly payment in about two minutes, and an in-home consultation gives a firm price, usually at the first visit.
Recent projects and what they cost
Each project page shows the range for that job (its contract price ±15%) with photos and what was installed.
Common questions about porch enclosure cost
How much does it cost to enclose a porch in Charlotte?
Most Valverax porch enclosures in the Charlotte area cost $3,600 to $25,800. A screened porch is the least expensive (typically $3,600 to $6,300), a Sunleaf vinyl-film enclosure typically runs $10,100 to $16,600, and a Seravue three-season glass enclosure $13,400 to $25,800. These are the middle half of real Valverax projects completed November 2024 – November 2026.
Is a vinyl-film or a glass porch enclosure cheaper?
Vinyl-film is usually less expensive: the typical Sunleaf vinyl-film project was $12,400, against $16,600 for a Seravue three-season glass enclosure. Vinyl-film panels also stack open for fresh air; glass gives clearer views and a more finished room.
How much does a four-season room cost?
A Seravue All-Season room built on an existing porch typically costs $19,700 to $36,800. A new sunroom built from the ground up generally costs about $50,000 to $100,000 or more, depending on size, foundation and finishes, and a room addition $80,000 to $250,000 or more.
How long does a porch enclosure take?
From signed agreement to finished room, the typical Valverax screened porch took about 7 weeks and a vinyl-film enclosure about 3 months; glass enclosures took about 4 months. Much of that time is HOA and permit approvals and custom-made materials; the installation itself is the shorter part.
What makes a porch enclosure cost more?
Mostly the size and number of openings, the system (screen, vinyl-film, glass or insulated glass), doors and transoms, whether the existing frame can be reused or new aluminum framing and knee walls are needed, and extras such as flooring, ceilings, steps, electrical, HOA review and permits.
Can I enclose a deck or patio that has no roof?
An enclosure needs a roof over it. A deck or patio without one first needs a roof structure, which turns the project into a sunroom or room addition with footings, framing and permits. Those cost more and take longer than enclosing an existing covered porch.
Still deciding between systems? Compare Sunleaf℠ and Seravue℠, take the best-fit quiz, or see financing options.